Other Maintenance
General workshop repair and labour charges
|
Complete bike builds * Standard build (including eTAP AXS) |
£200 |
| Fit headset | From £20 (if head tube needs reaming this is an additional £7.50) |
| Fit bottom bracket | From £20 (if threads need chasing this is an additional £7.50) |
| Replace chain/cassette and re-tune gears | From £25 |
| Replace chain/cassette, degrease parts and re-tune gears | From £40 |
| Replace brake blocks/cable | From £10 |
| Gear service | From £20 |
| Brake service | From £20 |
| Wheel true | From £10 per wheel |
| Swap cassette | £10 |
| Swap sprocket | £12 |
| Fit mudguards/rack | £25 |
| Disc brake service (parts permitting) | From £25 |
| Adjust gear hanger | From £20 |
| Fit new hub spindle | From £12 |
| Shimano Di2 or Campagnolo EPS firmware update | From £25 |
| Tubeless tyre set up | £15 per tyre |
| Tubular tyre set up (tape) | £15 per tyre |
| Tubular tyre set up (glue) | £25 per tyre |
| Crank thread repair | £25 |
| Look Zed crank bearing replacement | POA |
| Tannus tyre fitting | £20 for one tyre or £35 for two |
Puncture repair
| Fit new tube and re-fit tyre | £9 (plus cost of tube) |
| Fit tyre and tube to hub geared bike | £15 (plus cost of tube) |
| Fit tyre and tube to hub geared bike and chainguard | £20 (plus cost of tube) |
Specialist frame work
| Frame (rear end) alignment check | £15 |
| Advanced rear derailleurer hanger straightening | £30 |
| Rust-protection treatment on new frame (Frame-Save) if bare frame | £15 (includes materials) |
Hub gears
| Standard service, strip, clean and grease of bearings and internals | from £35 |
| Advanced service of hub | POA, dependent on model |
| Rohloff Speedhub oil replacement | £25 (includes flush & multi-seasonal oil) |
Packing a bike for travel
| Road bike (into hard-case or cardboard box) | £25 |
| Touring bike and MTB (into hard-case or cardboard box) | £30 (includes materials) |
| Re-assembly of bike (from carry case), inspection and quick tune | £35 |
Handlebar replacement
| Road bikes (drop bars, includes re-positioning as requested and bar tape fitting) | £25 (excludes parts, re-cabling, new bar tape) |
| ATB, flat bar, Bullhorn bars | £15 (excludes parts, re-cabling, new grips) |
Brompton servicing
| Rear puncture (does not include parts) | £15 |
| Replacement of rear hinge or bushings (parts not included) | £55 |
| Replacement of rear triangle plus hinge and bushing (parts not included) | £70 |
| Replacement of seat sleeve (parts not included) | £30 |
| Replacement of main frame hinge pin (includes pin) | £30 |
Dynamo light wiring
| Complete re-wire from hub of tyre-driven dynamo (does not include wires/sleeve) | £35 |
| Complete re-wiring of ex-novo installation on Brompton, from hub of tyre-driven dynamo (does not include wires/sleeve) | £25 |
Campagnolo Ergopower servicing
| Standard shifter service, on bare shifter (e.g. not mounted on bar), includes inspection, clean and replacement of parts | £25 (parts not included) |
| Escape shifter, service (as above) replacement of body-kit | £15 (kit not included) |
| Standard shifter service, with shifter mounted on the bike, includes inspection, clean and replacement of parts and gear tune, re-wrapping of bar tape | £35 (parts not included) |
| Escape shifter service, with shifter mounted to the bike, includes inspection, re-wrapping of bar tape and replacement of body kit | £25 (kit not included) |
